Antennas

HZG1

The HZG1 is a passive panel mount GPS antenna for multiband GNSS coverage. The antenna can be mounted to a standard SMA female bulkhead or panel mount connector. The antenna when installed is water and weather-proof to IP-68 standards.

  • Zero power draw, ideal for battery powered devices
  • Ultra durable rubber radome
  • Passive noise free design for multiband receivers
  • Broadband tune to accommodate housing/hand loading
DATASHEET

HZG3

The HZG3 is an active GPS/Glonass antenna with a 16.5dB LNA. The Antenna includes a filter which provides high out of band rejection to prevent out of band interference and desense of the LNA. The additional filtering makes the HZG3 ideal for close co-location to Cellular, LoRA, and WIFI systems. The compact size and LNA gain, balance size, weight and power usage. This makes the HZG3 ideal for use with modern GPS receivers.

Custom Cable Lengths and Connector options available.

DATASHEET

DLTEN(G)/DLTEN_W

The Dual LTE Narrow Mount Antenna (DLTEN) is a 4G LTE MIMO antenna designed for Cellular gateways and M2M/Industrial IOT/LoRA. The DLTEN is purpose-built with a rugged, low-profile molded radome and tamper-proof features required for outdoor mounting in public spaces.

  • Low-Profile/Narrow: 1.5 in (38 mm) height, 1.62 in (41 mm) width
  • Optimized for narrow and no-groundplane applications
  • Rugged construction for fixed and mobile applications
  • Threaded Stud + Automotive-grade gasket mounting
  • Optional GPS: DLTENG / DLTENG_W
  • Assembled in America, Majority Content USA
DATASHEET

DWN(G)/DWN_W

The Dual WiFi Narrow Mount Antenna (DWN) is a MIMO WiFi antenna designed for WiFi gateways and M2M/Industrial IOT/LoRA. The DWN is purpose-built with a rugged, low-profile molded radome and tamper-proof features required for outdoor mounting in public spaces.

  • Low-Profile/Narrow: 1.5 in (38 mm) height, 1.62 in (41 mm) width
  • Optimized for narrow and no-groundplane applications
  • Rugged construction for fixed and mobile applications
  • Threaded Stud + Automotive-grade gasket mounting
  • Optional GPS: DWNG/DWNG_W
  • Assembled in America, Majority Content USA
DATASHEET

HZD1LSBBO

The HZD1 is a broadband antenna with L/S 900ISM Band coverage. Optimized for Drone and other Unmanned Communication Systems. The antenna may be mounted with the standard mounting plate or with a custom mounting plate.

  • Stable Broadband Performance, with or without ground plane
  • SMA Female Standard: Other Connectors and Cable Feed options available
  • Custom Mounting Plate available; Accommodates any mounting surface
DATASHEET

HZDHPS1

The HZD1 is a broadband, omnidirectional antenna with optimized 2.2-2.5 GHz performance and extended Band coverage from 2-4 GHz. Optimized for Drone and other Unmanned Communication Systems.

  • Ultralight, Stable Pattern, NO ground plane required
  • Low-Loss Microwave Material Construction
  • SMA Female Standard: Other Connectors and Cable Feed options available
  • Custom Mounting Plate available; Accommodates any mounting surface
DATASHEET

CONCEPT

HZCMOSR/HZCMOSL

The HZCMOS is a passive, omnidirectional antenna designed for MIMO applications to augment the V/H polarization of traditional MIMO omni antennas. The internal antenna array is designed to provide circular polarization.

  • Circular Left/Right Polarized Omni-directional Array
  • 6 in. Repositionable Feed Stalk (3 in. capable)
  • Rugged Fiberglass Radome
  • IP68 Capable

CONCEPT

BHTB.VHF

Hz Labs has developed the next generation in covert, behind-the-bumper mounted VHF antennas. The BHTB.VHF antenna has been electromagnetically optimized and fi eld-tested for optimal performance across a wide range of common fleet vehicles. The BHTB.VHF can be ordered pre-tuned or fi eld-tuned for specific automotive platforms. The BHTB.VHF is IP67 rated and built to meet automotive-grade reliability standards.

  • Unique end-fed design for easier installation compared to center-fed antennas
  • Ultra-Flexible design allows for easy installation along internal bumper contours
  • Mechanical fasteners may be driven through center dielectric rib of the antenna
  • Made in the USA

CONCEPT

HZSODA-XX

The HZSODA-XX series of antennas are purpose-built for the next generation of mesh networks. Leveraging low power components, ultra-light materials tailored for modern day use cases. Conceived for drifting High Altitude Balloons, but ideal for UGV/UAV applications.

  • Simplified Architecture over Traditional Steered Arrays
  • Graceful Failure: fail-over to omni antenna performance with control failure/power loss
  • Mitigates Signal Detection Threats, radiated energy just to maintain mesh + geofenced
  • Integrated Ultra-low power control (uA)
  • Polarization Diversity options including circular polarization
  • SDR controlled leveraging steering optimized for client unique mesh algorithm

Antenna Solutions in Development

At Hertzian Labs, several antenna projects are currently in development to support emerging wireless applications and evolving deployment requirements.

These efforts are focused on expanding our portfolio with designs that emphasize:

  • Integrated and conformal antenna architectures

  • Multi-band, application-specific performance

Initial product releases are anticipated beginning in Q3 2026, with additional solutions to follow.

Day
Hour
Minute
Second
More Information